Career

To be part of our dynamic and ever-progressive team, email your updated resume to us at recruit@tomtekint.com

Current Projects

Malaysia :-

01. Mechanical Design Engineer (Kuala Lumpur, Malaysia)Urgent!

Required experience in engineering consultancy design of mechanical systems for Retail Malls, Hotels, Hospital, high rise commercials and residential building.
Experience in design of Mechanical Systems (HVAC, ACMV Services and BMS System).
Knowledgeable of Industry Code Requirements and Engineering Standards.
Computer literate, knowledge in project management software, AutoCAD is an added advantage.
Must possess communication leadership planning skills and absolute integrity alongside with management ability.
At least 5 years experience in relevant field.
Must register with Board of Engineer.
Must possess at least a Degree in Mechanical Engineering or equivalent.
Good command in English.
Hands on design experience.
Independant, self-motivated individual with good communication skills and interpersonal skills.
Philippines citizen are encourage to apply.

02. Senior Piping Stress Engineer (Kuala Lumpur, Malaysia)Urgent!

Supervision work for stress analysis activities.
Responsible for Piping Stress Analysis works such as CAESAR II operation, Piping Stress Analysis Isometric & Project documentation.
Responsible in Planning, Scheduling, QC of designated project.
Prepare Piping Stress Analysis progress report & schedule.
Degree in Mechanical / Material Engineering.
Min 6 years experience in Piping Stress Analysis (Oil & Gas).
Well Verse with Caesar II & AutoCad.
Experience in Greenfield & Brownfield Projects.
Familiar with international codes & standards.
Hands on design experience.
Independant, self-motivated individual with good communication skills and interpersonal skills.
Any experienced applicant are encourage to apply.

03. Commissioning Engineer (Kuala Lumpur, Malaysia)Urgent!

Making improvements to and offering advice about operational procedures.
Scheduling and coordinating work to tight deadlines.
Ensuring that equipment works to its specifications.
Creating & carrying out test procedures.
Degree in Chemical Engineering from a recognized university.
Min 3 years experiences in Plant Operation in Oil & Gas and Petrochemical industries.
Experience in preparing Plant Pre-commissioning, Startup and Operating Manual Procedures.
Responsible in monitoring progress and meeting the project datelines.
Possess good communication and people skills.
Willing to travel and station at site.
Able to comply environmental, quality and safety requirements at site.
Any experienced applicant are encourage to apply.

04. Project Control Manager(Kuala Lumpur, Malaysia)Urgent!

Establishing Project Control rules. tools & developing Project Control procedure.
Assuring consistency among the Project Baseline & plans of each discipline.
Collect necessary information, monitor & analyse Project Status.
Organize a Project Control Team to implement Project Control activities.
Min Degree or equivalent qualification in engineering field.
Min 5 years experience as Project Control Manager; and overall 10 yrs working experience in Project Planning & Control in Oil & Gas/Petrochemical.
Expert in Primavera 6, Microsoft Project & Access.
Good Communication & Leadership Skills.
Any experienced applicant are encourage to apply.

05. Piping Draughtsman (Kuala Lumpur, Malaysia)Urgent!

Execellent in Pipeline Drawing Work.
Extraction of Piping Isometrics from G.A.
Capable to read P & ID and material take off preparation.
Preparation & updating of Piping layout.
Min Certificate qualification.
Good communication skills.
Min 3 years experience in piping design for Oil & Gas Company.
Any experienced applicant are encourage to apply.

06. Document Controller, Site (Penang, Malaysia)Urgent!

Document Controller work experience at site.
Control of all document from Client and Subcontractor between Incoming & Outgoings.
Knowledge in IT system (any kind).
Lettering skill for official Letter to Client and Subcontractor.
Knowledge in Power Plant.
Good reporting skill for Document incoming and outgoing status.
Knowledge of Excel, Word and Power Point.
At least 3 years experience in POWER PLANT and 5 years experience in PLANT INDUSTRY (Total 8 years experience).
Any experienced applicant are encourage to apply.

07. Electrical Design Engineer (Kuala Lumpur, Malaysia)Urgent!

Prepare electrical designs for large scale industrial projects mainly in building services industry.
Analyze complex engineering problems and offer effective resolutions.
Oversee development of detailed design drawings including one line diagrams, plans, details, wiring diagrams and fabrications drawings.
Experience in design of Electrical Systems in LV/HT and BMS System.
Knowledgeable of Industry Code Requirements and Engineering Standards.
At least 5 years experience in relevant field.
Must register with Board of Engineer.
Must possess at least a Degree in Electrical Engineering or equivalent.
Good command in English.
Hands on design experience.
Independant, self-motivated individual with good communication skills and interpersonal skills.
Philippines citizen are encourage to apply.

08. Process Engineer (Kuala Lumpur, Malaysia)

Involve in basic and detailed engineering, ITB study & prepare bid specifications.
Process drawings preparation such as Piping & Instrumentation Diagram, Process Flow Shem and other deliverables.
Support precommissioning & commisioning activity.
Interface with clients and vendor to define project scope & meetings.
Degree in Chemical Engineering.
Min 4 years experience in process engineering in Oil & Gas and Petrochemical fields.
Well verse in Processs Simulation Experience in Pro II.
Willing to travel & station at site & work long hours.
Familiar with API.
Member of professional body is an added advantage.
Independant, self-motivated individual with good communication skills and interpersonal skills.
Any experienced applicant are encourage to apply.

09. Architect (Kuala Lumpur, Malaysia)Urgent!

Candidate must posses at least a Degree in Architecture, Advanced Diploma specializing in Architecture (Part II) or equivalent.
Candidate must have at least 5 years working experience in Architecture (Senior Level).
Able to operate AutoCAd, ability to use photoshop and sketch up is an added advantage.
Must be willing to work in Malaysia for 2 years contract minimal.
This position is open to any nationality.

10. Site Supervisor (Kuala Lumpur, Malaysia)

Monitoring Site Works Progress and Contractor Report.
Check drawing discrepancy and coordinate all construction drawing.
Attend site meeting and check material upon delivery to site.
Ensure quality and safety of construction work and preparation of site documentation.
Liaise with Architect/Engineer with regard to the method of rectification and inspecting of the completed defects rectification work.
Possess at least a Diploma/Degree in Engineering (Civil) or equivalent.
At least 3 years of working experience in the related field (Construction).
Able to communicate in English.
Philippines citizen are encourage to apply.

11. Electrical Engineer (Kuala Lumpur)

Prepare electrical deliverables such as Single Line Diagram.
Knowledge in Electrical Design.
Experience in Project Engineering and Preparation of Electrical Inquiry Documents.
Develope engineering design work.
Min. Degree qualification.
Min. 3 years of working experience in Oil & Gas.

12. Admin Assistant (Cheras, Kuala Lumpur)

Prepare and manage correspondence, reports and documents.
Communicate verbally and in writing to answer inquiries and provide information.
Lead in ad-hoc assignments from time to time.
At least a Diploma/Degree with 1 year of working experience.
Good command of spoken and written in English and BM.
5 days week.
Fresh graduates are encouraged to apply.
Interested, please send your updated resume to account@tomtekint.com

13. Accounts Assistant (Cheras, Kuala Lumpur)

To perform daily office accounting and administration task as required.
To assist in other ad-hocs assignments.
Diploma/Degree in Accounting with at least 1 year of related working experience.
Good command of spoken and written in English and BM.
5 days week.
Fresh graduates are encouraged to apply.
Interested, please send your updated resume to account@tomtekint.com

14. Quantity Surveyor - Civil (Kuala Lumpur & Kulai, Johor)

Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma in engineering professional (Mechanical/Electrical), Quantity Survey or equivalent.
At least 3 year(s) of working experience in the related field is required
Responsible for pre and post contract management, monitoring materials and construction cost, procurement, site valuation, variation order, final accounts.
Well versed in tender exercise, pricing, estimates, feasibilities studies, cost control & estimation and contract management;
Analyzes tender document comprises of BOQ, tender clarification and unit price etc
Develops the bid cost estimate of project construction actiivities and services
Ability to source for suppliers and subcontractors for quotation for tendering

UAE - Abu Dhabi :-

01. Project Procurement Managers

Bacleor's or Master's degree in engineering or equivalent.
Minimum 4-8 years of working experience in oil and gas or petrochemical industry
Plans, manages and coordinates procurement activities on assigned project
Prepares and participates on behalf of procurement in presentations made to potential customers
Involved in estimate/budget preparation and in budget and cost-control activities

02. Mechanical Engineers

Bachelor's or master's degree in engineering or equivalent.
Minimum 4-8 years of working experience in oil and gas, infrastructure or energy industry
Well versed in international codes and standards eg. API, ANSI, ASME and industry practices to be applied for construction projects during FEED and EPC phase
Review vendor mechanical submittals for pumps, valves, piping systems, heavy lifting/moving equipment, permanent cranes and builk handling equipment
Review mechanical calculations, drawings and specifications for piping systems, pumping plants in terms of sizes, layout and ensuring that future operations and maintenance issues have been considered
Review submissions for design and construction of mechanical systems related to industrial wastewater collection and treatment facilities, seawater cooling systems, irrigation systems, pumping plant and pumping stations.
Preferably well versed with materials and welding and PMC / EPC experiences

03. Rotating Equipment Engineer

Bachelor's degree or Master's in engineering or equivalent.
Minimum 4-8 years of working experience in oil and gas, chemical or marine engineering industry
Well versed in international codes and standards eg. API, ANSI, ASME and industry practices
Review of technical queries and concession requests associated with rotating equipment related Borouge general specifications for project wide consistency.

04. Senior Civil Engineer

Bachelor's degree or Master's in civil / structural engineering or equivalent.
Minimum 7-8 years' working experience in oil and gas, chemical or marine industry
Preferably experienced in civil and structural engineering projects
PMC/EPC experience and understanding of civil and structural codes, standards and industry practices
Review of technical queries and concession requests that are CSA related
Review and approval of civil/structural specifications, material selection, design documents, 3D modeling methodology and deliverables, MRs and Vendor Print Reviews.
General specifications for project wide consistency

05. Process Safety Engineer

Bachelor's degree or Master's in EHS engineering or equivalent.
Minimum 4-8 years of working experience in oil and gas or chemical engineering industry
Well versed in international codes, standards, distributions and industry practices especially in ADNOC Code of practices
Ensure HSEIA consultant receives all necessary data from engineering contractors
Review HSEIA consultants deliverables, comment and ensure final products are of satisfactory quality
Coordinate with other disciplines, especially environmental group, on execution of HSEIA
Review other EPC deliverables such as Firewater P&IDs and overall firewater system design
Active and passive fire protection layouts F&G equipment layouts

top